DCD1623N-XJ
18V XR MAGNETIC DRILL WITH PERMANENT MAGNET - Bare Unit
18V XR MAGNETIC DRILL FRONT 3/4 VIEW
18V XR MAGNETIC DRILL LEFT SIDE VIEW
18V XR MAGNETIC DRILL FRONT 3/4 VIEW ALTERNATIVE VIEW
18V XR MAGNETIC DRILL RIGHT SIDE VIEW
18V XR MAGNETIC DRILL REAR 3/4 VIEW
A TRADESMAN USING A DCD1623 TO CUT A HOLE IN A STEEL BEAM
A TRADESMAN USING A DCD1623 TO CUT A HOLE IN A STEEL BEAM
A TRADESMAN USING A DCD1623 TO CUT A HOLE IN A STEEL BEAM
XR FLEXVOLT 9AH BATTERY BEING INSRTED INTO A DCD1623 18V XR MAGNETIC DRILL
18V XR MAGNETIC DRILL BEING USED WITH THE OPTIONAL 3 JAW CHUCK TO DRILL A HOLE IN A STEEL BEAM
A USER CHANGING THE VARIABLE SPEED ON THE DCD1623 USING THE VARIABLE SPEED DIAL
CLOSE UP OF THE CHUCK ON DCD1623 18V XR MAGNETIC DRILL
CLOSE UP OF THE MODE SELECTOR ON 18V XR MAGNETIC DRILL
CLOSE UP OF THE FORWARD AND REVERSE SWITCH ON DCD1623 18V XR MAGNETIC DRILL
CLOSE UP OF THE MAGNETIC LOCK ON HANDLE ON DCD1623 18V XR MAGNETIC DRILL
CLOSE UP OF THE CARRY HANDLE / BATTERY DOOR ON DCD1623 18V XR MAGNETIC DRILL
DCD1623N-XJ

18V XR MAGNETIC DRILL WITH PERMANENT MAGNET - Bare Unit

  • Maximum drilling capacity of 50 mm with annual cutters 
  • Brushless Motor provide corded drill performance and can complete 40x20mm Holes on 12 mm Steel per battery Charge (9 AH)
  • 2 speed mechanical transmission along with 5 electronic variable speed in order to achieve optimal drilling speed for small and large diameter bits
View more features

Product Overview

This 18V XR Brushless 50mm Magnetic Drill features technology that makes the drill up to 32% more powerful when using a XR FLEXVOLT® DCB547 battery*. Built to help prevent tool failure due to lost power, it securely attaches to metal by using a permanent magnet base that requires no electrical charge. This high-performance magnetic drill press packs the capacity to drill up to 40 holes per charge**he Quick-Change Chuck system allows for tool free change between 19mm Weldon Shank and 13mm keyed chuck (Included). To keep the user in control, the E-Clutch is designed to turn off when it detects rotation, part of the PERFORM & PROTECT™ family. The drill has 5 variable speeds for each of the 2 mechanical gears for a total of 10 speed settings to allow for a wide RPM range for a variety of applications.\n*Using DCB547G battery vs. DCB184 battery, **Up to 40 holes per charge on 13mm ASTM A36 steel 20mm hole size using DCB547G battery.

Additional Features

  • Perform Protect (GYRO): Lift-off detection: Detects excess rotation and automatically cuts power for best user protection
  • On board LED light to illuminate the work surface
  • Forward and Reverse option make it convenience for Tapping
  • Permanent magnet with 9,9 KN of holding force prevents accidental magnet deactivation for improved user protection and easy alignment
  • 15% Magnet engagment for fine adjustment of Magnetic Drill Before fully engaging the Magnet

Includes

  • (1) 16mm Chuck
  • (1) Reversible press handle
  • (1) Safety Chain
  • (1) Gravity fed cutting fluid tank
  • (1) Drilling guard
  • (1) Pilot Pin
  • (1) Heavy duty carrying case

Specifications

Brushless
Yes
Battery Capacity
12 Ah
Overload Protection
Yes
Product Height [Metric]
345.4 mm
Product Weight [Metric]
14.3 Kg
Number of Speed Settings
10
Chuck size [Metric]
16 mm
Power Source
Cordless
Reverse
Yes
Length of drill stroke [Metric]
120 mm

Support

Warranty

  • 3 Year Limited Warranty, 1 Year Free Service, 30 Days Satisfaction Guaranteed

We’re confident of the quality of our products and we’ll repair, without charge, any defects due to faulty materials or workmanship within the specified warranty.

Click here

Service

We take extensive measures to ensure all our products are made to the very highest standards and meet all relevant industry regulations.

Support Manual